acura Workshop Repair Guides

Acura (Honda) Workshop Service and Repair Manuals

Odometer > < Malfunction Indicator Lamp|Locations|Page 13969
Page 4
background image

Trouble Code Descriptions

NO - Go to step 26.

25. Turn the ignition switch OFF, then turn it back ON (II).

26. Measure voltage between PCM connector terminal A10 and body ground.

Is there about 5 V (or battery voltage)?

YES - Go to step 27.

NO - Repair short in the wire between the DLC and the PCM (A1O).

27. Turn the ignition switch OFF.
28. Disconnect PCM connector A (32P).
29. Turn the ignition switch ON (II).

Is the MIL on?

YES - Repair short in the wire between the gauge assembly and the PCM (A18).

NO - Substitute a known-good PCM and recheck. If the symptom/indication goes away, replace the original PCM. 

Odometer > < Malfunction Indicator Lamp|Locations|Page 13969