3.2TL TYPE S V6-3.2L SOHC (2002)
12. Remove the cotter pin (A) from the tie-rod end ball joint, then loosen the nut (B).
13. Remove the tie-rod ball joint from the knuckle using the special tool.
14. Remove the cotter pin (A) from the lower arm ball joint castle nut (B), and remove the nut.
15. Remove the lower ball joint from the knuckle using the special tool.
16. Remove the cotter pin (A) from the upper ball joint castle nut (B), and remove the nut.
17. Remove the upper ball joint from the knuckle using the special tool.
