3.2TL TYPE S V6-3.2L SOHC (2002)
4. Turn the ignition switch ON (II).
5. Measure voltage between DLC terminals No.13 and No.15.
Is there 8.5 V or more?
YES - Go to step 11.
NO - Go to step 6.
6. Turn the ignition switch OFF.
7. Disconnect the negative cable from the battery.
8. Disconnect PCM connector A (32P). Make sure the OBD II scan tool or Honda PGM Tester is disconnected from the DLC.
9. Check for continuity between DLC terminal No.15 and body ground.
Is there continuity?
YES - Repair short to ground in the wire between DLC terminal No.15 and the PCM (A21). After repairing the wire, check the DTC with the
OBD II scan tool/Honda PGM Tester, and go to the DTC Troubleshooting index. See: Testing and Inspection/Diagnostic Trouble Code
Descriptions
NO - Go to step 10.
