3.2TL TYPE S V6-3.2L SOHC (2002)
Variable Induction Control Valve: Testing and Inspection
Intake Manifold Runner Control Valve Inspection
Intake Manifold Runner Control (IMRC) Valve Inspection - J32A2 Engine
NOTE: Do not adjust the IMRC adjusting screw (A).
1. Check for clearance between the stopper (B) and the screw (A). There should be no clearance.
-
If there is a clearance, check and adjust the IMRC actuator cable.
-
If there is clearance after adjusting the IMRC actuator cable, the linkage may be stuck. Remove the intake manifold, then check the IMRC
valve