acura Workshop Repair Guides

Acura (Honda) Workshop Service and Repair Manuals

How to Replace Connector Terminals|Page 70 > < How to Replace Connector Terminals|Page 68
Page 5
background image

9. Reconnect the passenger's multiplex control unit to the passenger's under dash fuse/relay box, and perform the following input tests at the

appropriate connectors on the passenger's under dash fuse/relay box If a second key is not available for the key cylinder tests, make a non
immobilizer copy For passenger's under-dash fuse/relay box connector socket location.
-

If any test indicates a problem, find and correct the cause, then recheck the system.

-

If all the input tests prove OK, go to step 10.

Multiplex Control Unit, Door

10. Remove the door multiplex control unit, and disconnect its connector.

11. Inspect the connector and socket terminals to be sure they are making good contact

How to Replace Connector Terminals|Page 70 > < How to Replace Connector Terminals|Page 68