acura Workshop Repair Guides

Acura (Honda) Workshop Service and Repair Manuals

Control Module HVAC|Locations|Page 426 > < Control Module HVAC|Locations|Page 424
Page 1
background image

Control Module HVAC: Testing and Inspection

Climate Control Power and Ground Circuits Troubleshooting

1. Check the No. 54 (40 A) fuse in the under-hood fuse/relay box, the No. 3 (7.5 A) fuse in the driver's under-dash fuse/relay box, and the No. 13 (

7.5 A) fuse in the passenger's under-dash fuse/relay box.

Are the fuses OK?

YES - Go to step 2.

NO - Replace the fuse(s), and recheck.

2. Disconnect climate control unit connector A (12P).
3. Turn the ignition switch ON (II).

4. Measure the voltage between the No. 11 terminal of climate control unit connector A (12P) and body ground.

Is there battery voltage?

YES - Go to step 5.

NO - Repair open in the wire between the No. 3 fuse in the driver's under-dash fuse/relay box and the climate control unit.

5. Turn the ignition switch OFF.

6. Measure the voltage between the No. 10 terminal of climate control unit connector A (12P) and body ground.

Is there battery voltage?

YES - Go to step 7.

NO - Repair open in the wire between the No. 13 fuse in the passenger's under-dash fuse/relay box and the climate control unit.

Control Module HVAC|Locations|Page 426 > < Control Module HVAC|Locations|Page 424