3.2TL TYPE S V6-3.2L SOHC (2002)
Air Bag: Service and Repair
Driver Side
Driver's Airbag Replacement
Removal
1. Disconnect the battery negative cable and wait at least 3 minutes before beginning work.
2. Remove the access panel (A) from the steering wheel, then disconnect the connector between the cable reel 2P ('99-01 Models) or 4P ('02-03
Models) connector (B) and driver's airbag 2P ('99-01 Models) or 4P ('02-03 Models) connector (C).
3. Remove the covers (A, B) from the steering wheel, then remove the two Torx bolts (C) using a Torx T30 bit. Then remove the driver's airbag (D).
4. Disconnect the horn connector from the steering wheel.
Installation