3.2TL TYPE S V6-3.2L SOHC (2002)
6. Disconnect the 2P connector between the side airbag (A) and the SRS floor harness (B).
Seat belt tensioner:
7. Disconnect the 2P connector between the seat belt tensioner (A) and side wire harness (B).
8. Pull the seat belt out all the way and cut it.
9. Cut off the airbag connector, strip the ends of the airbag wires, and connect the deployment tool alligator clips (A) to the airbag wires. Place the
deployment tool at least 30 feet (10 meters) away from the airbag.
NOTE: The driver's and front passenger's airbags have four wires each, two green and two white. Twist each pair of unlike color wires together
and connect one alligator clip to each pair.
10. Connect a 12 volt battery to the tool.
