3.2TL TYPE S V6-3.2L SOHC (2002)
1.
Adjust the front passenger's seat-back to an upright position, then remove anything that is on or near the seat.
2.
Turn the ignition switch to the LOCK (0) position.
3.
On all models except 3.5RLs, connect the HDS to the vehicle's DLC (data link connector). Keep the ignition switch in the LOCK (0) position, and
turn on the HDS.
4.
On 3.5RLs, connect the SCS service connector to the 2P service check connector. Do not use a jumper wire. Refer to page 24-88 of the 1996-01
3.5HL Service Manual for details. Go to step 8.
5.
At the screen prompts, enter the VIN and the odometer reading.
