3.2TL TYPE S V6-3.2L SOHC (2002)
Seat Belt: Service and Repair
Front Seat Belt Replacement
Front Seat Belt Replacement
SRS components are located in this area. Review the SRS component locations and the precautions and procedures in the SRS section before performing
repairs or service.
NOTE: Check the front seat belts for damage, and replace them if necessary. Be careful not to damage them during removal and installation.
Front Seat Belt
1. Make sure you have the anti-theft code for the radio, then write down the frequencies for the preset buttons.
2. Disconnect the negative battery cable, and wait at least 3 minutes before beginning work.
3. Slide the front seat all the way forward.
4. Remove these items:
-
Rear seat cushion.
-
Center pillar lower trim panel.
5. Remove the upper anchor cover (A), and pull the lower anchor cover(B)back.
