3.2TL TYPE S V6-3.2L SOHC (2002)
10.
Install the new buckle assembly on the seat. Torque the center anchor bolt to 32 Nm (24 lb-ft).
11.
Route the buckle harness and connect the harness clips to the seat frame.
12.
Reinstall the side trim piece.
13.
Carefully set the seat back in the car.
14.
Reconnect the harness connectors and the harness clips.
15.
Reinstall the seat mounting bolts. Torque the bolts to 34 Nm (25 lb-ft). Reinstall the seat track covers.
16.
Repeat steps 3 thru 15 if you have to replace the seat belt buckle assembly on the other seat.
17.
Reconnect the negative cable to the battery.
18.
Enter the audio system anti-theft code and the customer's radio station presets. Enter the navigation system anti-theft code (if equipped). Set the
clock.
19.
Center-punch a completion mark above the fifth character (A) of the engine compartment VIN.
DISCLAIMER
