3.2TL TYPE S V6-3.2L SOHC (2002)
-
Always reinstall plastic covers.
-
Before connecting connectors, make sure the terminals (A) are in place and not bent.
-
Check for loose retainer (A) and rubber seals (B).
-
The backs of some connectors are packed with grease. Add grease if necessary. If the grease is contaminated, replace it.
-
Insert the connector all the way and make sure it is securely locked.
-
Position wires so that the open end of the cover faces down.
Handling Wires and Harnesses
-
Secure wires and wire harnesses to the frame with their respective wire ties at the designated locations.
