3.2TL TYPE S V6-3.2L SOHC (2002)
Radiator Cooling Fan Temperature Sensor / Switch: Service and Repair
Radiator Fan Switch B Replacement
Replacement
1. Set the No. 1 piston at TDC.
2. Remove the upper covers.
3. To hold the timing adjuster in its current position, thread in the battery clamp bolt hand-tight.
4. Loosen the idler pulley bolt about 5 or 6 turns, then remove the timing belt from the front camshaft pulley,.
5. Remove the front camshaft pulley.
6. Disconnect the TDC 1/TDC 2 sensor connector, then remove the back cover.
7. Disconnect the radiator fan switch B connector, then remove radiator fan switch B (A).
8. Install radiator fan switch B using a new O-ring (B).