3.2TL TYPE S V6-3.2L SOHC (2002)
Front Steering Knuckle: Service and Repair
Knuckle/Hub Replacement
Special Tools Required
-
Ball joint remover, 28 mm 07MAC-SL00200
-
Hub disassembly tool 07GAF-SE00100
-
Attachment 58 x 72 mm 07947-6340201
-
Bearing driver attachment 07965-SA00600
-
Driver 07749-0010000
-
Support base 07965-SD90100
1. Loosen the wheel nuts slightly.
2. Raise the front of the vehicle, and make sure it is securely supported.
3. Remove the wheel nuts and front wheel.