3.2TL TYPE S V6-3.2L SOHC (2002)
Key Reminder Switch: Testing and Inspection
Ignition Key Switch Test
NOTE: For more key-in beeper information, refer to the circuit diagram and input test.
When the ignition key is not removed, the key-in beeper in the driver's multiplex control unit senses ground through the closed ignition key switch. When
you open the driver's door, the beeper circuit senses ground through the closed door switch.
1. Remove the steering column upper and lower covers.
2. Disconnect the 7P connector.
3. Check for continuity between the No. 1 and No. 3 terminals.
-
There should be continuity with the key in the ignition switch.
-
There should be no continuity with the key removed.
4. If the continuity is not as specified, replace the ignition key switch.