3.2TL TYPE S V6-3.2L SOHC (2002)
1. Install the damper unit on a commercially available strut spring compressor (A).
2. Assemble the damper in reverse order of removal except for the washer and self-locking nut. Align the bottom of damper spring and spring lower
seat (B).
3. Position the mount base (A) on the damper unit.
4. Compress the damper spring with the spring compressor.
5. Install the rubber bushing, washer (A), and a new 10 mm self-locking nut (B).
6. Hold the damper shaft, and tighten the 10 mm self locking nut.
Installation