3.2TL TYPE S V6-3.2L SOHC (2002)
4. Raise the locking tab on the spindle nut (A), then remove the nut.
5. Remove the brake hose mounting bolts (A).
6. Remove the caliper mounting bolts (B), and hang the caliper assembly (C) to one side. To prevent damage to the caliper assembly or brake hose,
use a short piece of wire to hang the caliper from the undercarriage.
7. Remove the wheel sensor (A) from the knuckle (B). Do not disconnect the wheel sensor connector.
8. Remove the 6 mm brake disc retaining screws (A).
9. Screw 2 8 x 1.25 mm bolts (B) into the disc to push it away from the hub. Turn each bolt 2 turns at a time to prevent cocking the disc excessively.
10. Remove the brake disc from the knuckle.
11. Check the front hub for damage and cracks.
