3.2TL TYPE S V6-3.2L SOHC (2002)
Pressure Regulating Solenoid: Service and Repair
A/T Clutch Pressure Control Solenoid Valves A and B Replacement
A/T Clutch Pressure Control Solenoid Valves A and B Replacement
1. Remove the harness cover from the transmission hanger.
2. Remove the mounting bolts and A/T clutch pressure control solenoid valves A and B (A).
3. Clean the mounting surface and fluid passages of A/T clutch pressure control solenoid valves A and B and the transmission housing.
4. Place a new gasket (B) on the transmission housing, then install the 8 x 18 mm ATF feed pipes (C) with their filter sides into the transmission
housing.
5. Install new O-rings (D) over the feed pipes, and install the 8 x 40 mm ATF feed pipe (E).
6. Install new A/T clutch pressure control solenoid valves A and B (A) and harness clamp bracket (F).
7. Check the A/T clutch pressure control solenoid valve connectors for rust, dirt, or oil, then connect them securely.
8. Install the harness cover on the transmission hanger.
