3.2TL TYPE S V6-3.2L SOHC (2002)
Fluid Pressure Sensor/Switch: Service and Repair
4TH Clutch Pressure Switch Replacement
4th Clutch Pressure Switch Replacement
1. Disconnect the connector from the 4th clutch pressure switch (A).
2. Replace the 4th clutch pressure switch, then install a new one with a new sealing washer (B). Tighten the switch on the metal part, not the plastic
part.
3. Reconnect the connector, making sure there is no water, oil, dust, or other foreign particles inside it.
