3.2TL TYPE S V6-3.2L SOHC (2002)
Shift Solenoid: Service and Repair
Shift Solenoid Valves A and C Replacement
Shift Solenoid Valves A and C Replacement
NOTE: If shift solenoid valves A and C are replaced or removed at the same time, be sure to reinstall them correctly. The connector color of shift
solenoid valve A is black, and the connector color of shift solenoid valve C is brown.
1. If you are replacing shift solenoid valve C, remove the starter.
2. Remove the mounting bolt and the shift solenoid valve A.
3. Remove the mounting bolt and shift solenoid valve C.
4. Install a new shift solenoid valve A or C with new O-rings (B). While installing the valves, do not allow dust or other foreign particles to enter the
transmission.
5. Check the connector for rust, dirt, or oil, then reconnect it.
6. Install the starter, if removed.