3.2TL TYPE S V6-3.2L SOHC (2002)
Shift Solenoid: Testing and Inspection
Shift Control Solenoid Valves A and C Test
Shift Control Solenoid Valves A and C Test
1. Remove the starter.
2. Disconnect the shift control solenoid valve A and C connectors.
3. Measure shift control solenoid valve A and C resistance at each connector.
STANDARD: 12 - 25 Ohms
4. Replace shift control solenoid valve A or C if the resistance is out of standard.
5. If the resistance is within the standard, connect the No. 2 terminal of the shift control solenoid valve A or C connector to the battery positive
terminal, and connect the No. 1 terminal to the battery negative terminal. A clicking sound should be heard. Replace shift control solenoid valve A
or C if no clicking sound is heard.
