3.2TL TYPE S V6-3.2L SOHC (2002)
14. Set the new double loop band (A) onto the boot (B) and dynamic damper with the band end toward to front of the vehicle.
15. Pull up the slack in the band by hand.
16. Make a mark (A) on the band 10 - 14 mm (0.4 - 0.6 inch) from the clip (B).
17. Thread the free end of the band through the. nose section of the commercially available boot band tool KD-3191 or equivalent (A), and into the
slot on the winding mandrel (B).
18. Place a wrench on the winding mandrel of the boot band tool, and tighten the band until the marked spot (C) on the band meets the edge of the
clip.