3.2TL TYPE S V6-3.2L SOHC (2002)
Fluid Pressure Sensor/Switch: Service and Repair
3RD Clutch Pressure Switch Replacement
3rd Clutch Pressure Switch Replacement
1. Remove the switch cover (A).
2. Disconnect the connector from the 3rd clutch pressure switch (B).
3. Replace the 3rd clutch pressure switch, then install a new one with a new sealing washer (c). Tighten the switch on the metal part, not the plastic
part.
4. Reconnect the connector, making sure there is no water, oil, dust, or other foreign particles inside it.
5. Install the switch cover.
