3.2TL TYPE S V6-3.2L SOHC (2002)
7. Remove the bolts, then carefully remove the glass (A) out through the window slot. Take care not to drop the glass inside the door.
8. Disconnect and detach the connector (A) and harness clip (B) from the door. Remove the bolts (C), and loosen the bolts (D), then remove the
regulator (E) through the hole in the door.
9. Apply multipurpose grease to all the sliding surfaces of the regulator (A) where shown.
1O. Install the glass and regulator in the reverse order of removal, and note these items:
