acura Workshop Repair Guides

Acura (Honda) Workshop Service and Repair Manuals

Windshield Washer Control Module|Testing and Inspection|Page 15399 > < Windshield Washer Control Module|Testing and Inspection
Page 2
background image

4. With the driver's multiplex control unit still disconnected, make these input tests at the connector and driver's under-dash fuse/relay box sockets.

-

If any test indicates a problem, find and correct the cause, then recheck the system.

-

If all the input tests prove OK, go to step 5.

Multiplex Control Unit, Passenger's:

5. Remove the passenger's under-dash fuse/relay box.
6. Remove the passenger's multiplex control unit from the passenger's under-dash fuse/relay box, and disconnect its connector.

Windshield Washer Control Module|Testing and Inspection|Page 15399 > < Windshield Washer Control Module|Testing and Inspection