3.2TL TYPE S V6-3.2L SOHC (2002)
Windshield Washer Motor: Testing and Inspection
Washer Motor Test
1. Remove the right inner fender.
2. Disconnect the 2P connector (A) from the washer motor(B).
3. Test the washer motor by connecting battery power and ground according to the table.
-
If the motor fails to run smoothly, replace it.
-
If the motor runs smoothly, but little or no washer fluid is pumped, check for a disconnected or blocked washer hose, or a clogged pump outlet
in the motor.
