3.5RL V6-3474cc 3.5L (2001)
4. Detach the retainers, then remove the carpet.
NOTE: Take care not to damage, wrinkle, or twist the carpet.
5. Installation is the reverse of the removal procedure.
NOTE:
-
Take care not to damage, wrinkle, or twist the carpet.
-
Make sure the seat harness is routed correctly.
-
If necessary, replace any damaged clips.
-
Reattach the cut area (A) in the carpet with a wire tie as follows.
a. Tie a string to the end of the carpet, then slip the carpet under the heater unit by pulling the string.
