3.5RL V6-3474cc 3.5L (2001)
Sunroof / Moonroof Module: Testing and Inspection
Control Unit Input Test
1. Remove the right rear pillar trim.
2. Disconnect the moonroof harness 3P connector from the right side wire harness.
3. Make the following input tests at the right side wire harness 3P connector.
-
If any test indicates a problem, find and correct the cause, then recheck the system.
-
If all the input tests prove OK, go to step 4.
4. Connect the moonroof 3P connector to the right side wire harness.