3.5RL V6-3474cc 3.5L (2001)
Sunroof / Moonroof Limit Switch: Adjustments
Switch Plate Adjustment (Fully Closed Position/Auto Stop Position)
1. Remove the headliner.
2. Using the moonroof wrench, close the glass fully.
NOTE: Check the glass fit to the roof panel.
3. Using an open-end wrench, loosen the switch plate A mounting bolts.
4. Adjust position of switch plate A (switch cam) as shown.
NOTE:
-
Move switch plate A a little at a time, then secure switch plate A at the position where the switch cam contacts the closed position switch (a
faint click is heard).
-
Check that switch plate A contacts the cable bracket.
5. Using the moonroof wrench, open the glass to the auto stop position as shown.
6. Using an open-end wrench, loosen the switch plate B mounting bolts.
7. Adjust position of switch plate B (switch cam) as shown.