3.5RL V6-3474cc 3.5L (2001)
5. Loosen the seat-back cover by releasing all the clips, hooks, and inside springs.
6. Pull back the edge of the seat-back cover all the way around, release the clips, and remove the seat-back cover.
7. Installation is the reverse of the removal procedure.
NOTE:
-
To prevent wrinkles when installing a seat-back cover, make sure the material is stretched evenly over the pad before securing the hooks, clips
and inside springs.
-
Replace the released clips with new ones.
Seat Cushion Cover:
1. Remove the seat cushion.
2. Loosen the seat cushion cover by releasing all the clips.