3.5RL V6-3474cc 3.5L (2001)
9. Remove the camshaft holders. Measure the widest portion of plastigage on each journal.
10. If camshaft-to-holder oil clearance is out of tolerance:
-
And the camshaft has already been replaced, you must replace the cylinder head.
-
If the camshaft has not been replaced, first check the total runout with the camshaft supported on V-blocks.
-
If the total runout of the camshaft is within tolerance, replace the cylinder head.
-
If the total runout is out of tolerance, replace the camshaft and recheck. If the oil clearance is still out of tolerance, replace the cylinder head.