3.5RL V6-3474cc 3.5L (2001)
-
Apply a light coat of oil to the crankshaft and to the lip of the oil seal.
-
Use a new O-ring and apply oil when installing it.
11. Apply liquid gasket to the cylinder block mating surface of the oil pump.
NOTE: Do not apply liquid gasket to the O-ring grooves.
12. Install the oil pump with new O-rings.
NOTE:
-
Apply a light coat of oil to the crankshaft and to the lip of the seal.
-
Use new O-rings and apply oil when installing them.