acura Workshop Repair Guides

Acura (Honda) Workshop Service and Repair Manuals

Center Air Vent|Page 8994 > < Air Mix Control Motor Replacement|Page 8989
Page 1
background image

Air Register: Service and Repair
Center Air Vent

Component Removal/Installation

CAUTION:  When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage.

NOTE:  Take care not to scratch the dashboard and related parts.

Climate control unit, audio unit and center air vent:

SRS components are located in this area. Review the SRS component locations, precautions, and procedures before performing repairs or service.

1. Remove:

-

Console panel

-

Console lower carpet, both sides

2. Make sure you have the anti-theft code for the radio, then write down the frequencies for the radio's preset buttons.

3. Remove the bolts. Pull out the bottom of the climate control unit, audio unit, and center air vent as an assembly, and carefully detach the clip at the

center air vent. Disconnect the connectors and antenna leads, then remove it.

4. Installation is the reverse of the removal procedure.

NOTE:
-

Make sure the connectors and antenna lead are connected properly.

-

Enter the anti-theft code for the radio, then enter the customer's radio station presets.

Center Air Vent|Page 8994 > < Air Mix Control Motor Replacement|Page 8989