Replace Transmission Position Switch/Sensor on 2001 35RL V6-3474cc
16. Tighten the locknut while holding the control shaft, then bend the lock tabs against the locknut.
17. Tighten the 6 mm bolts to the specified torque.
18. Install the control lever.
CAUTION: Take care not to bend the shift cable.
19. Connect the shift solenoid valve/A/T clutch pressure control solenoid valve harness connector.
20. Install the shift solenoid valve/A/T clutch pressure control solenoid valve harness clamp to the shift cable cover, then install the shift cable cover
onto the transmission.
21. Connect the transmission range switch harness connector, then clamp the harness clamp on the brackets.