3.5RL V6-3474cc 3.5L (2001)
8. Replace the O-rings with new ones before reassembling the mainshaft and countershaft speed sensors.
9. Install the washers on the mainshaft and countershaft speed sensors, then install them on the transmission housing.
10. Raise the transmission with a jack.
11. Install the transmission beam on the rear transmission mount bracket/mount, then tighten the four bolts loosely.
12. Tighten the four transmission beam bolts, then tighten the three transmission beam bolts to the specified torque.
13. Install the shift cable guide bracket on the transmission beam.
14. Install the heat shields.
15. Install the exhaust pipe A and the three way catalytic converter, then install the exhaust pipe A bracket.
16. Push the secondary HO2S connector into the vehicle, then secure with the harness grommet.
17. Install the secondary HO2S harness cover.
18. Connect the secondary HO2S connector.
