3.5RL V6-3474cc 3.5L (2001)
Relay Box: Service and Repair
Under-dash Fuse/Relay Box
Removal/Installation
SRS components are located in this area. Review the SRS component locations, precautions, and procedures before performing repairs or service.
NOTE: The PCM memory must be reset after reconnecting the battery.
Removal:
1. Make sure you have the anti-theft code for the radio and the navigation system, then write down the frequencies for the radio's preset buttons.
2. Disconnect the battery negative cable, then disconnect the positive cable, and wait at least 3 minutes.
3. Disconnect the airbag connectors.
4. Disconnect the connectors from the under-dash fuse/ relay box, including the SRS main harness.
5. Remove the dashboard lower cover.
6. Remove the mounting nut and bolt, and pull the under-dash fuse/relay box out from under the dash.
Installation:
1. Connect the connectors to the under-dash fuse/relay box, then install the under-dash fuse/relay box in the reverse order of removal.
2. Install the dashboard lower cover.
3. Connect the airbag connectors.
4. Connect the battery positive cable, then connect the negative cable.
5. Confirm that all systems work properly.
6. Enter the anti-theft code for the radio and the navigation system, then enter the customer's radio station presets.
