3.5RL V6-3474cc 3.5L (2001)
Steering Column Control Unit Input Test - Index (Part 2)
3. Inspect the connector and socket terminals to be sure they are all making good contact.
-
If the terminals are bent, loose or corroded, repair them as necessary, and recheck the system.
-
If the terminals look OK, make the following input tests at the connector.
-
If a test indicates a problem, find and correct the cause, then recheck the system.
-
If all the input tests prove OK, substitute a known-good control unit, and recheck the system
NOTE:
-
If all the control unit (steering column, power seat, power mirror) input tests prove OK, disconnect all three control units, and check for
opens or shorts in the communication lines.
-
All connector views are from wire side of female terminals.
