3.5RL V6-3474cc 3.5L (2001)
Front Passenger's Airbag:
-
Connect the front passenger's airbag connector to the SRS main harness connector, then install the glove box.
Driver's Side:
-
Connect the driver's airbag 2P connector to the cable reel 2P connector, then install the access panel on the steering wheel.
7. Reconnect the battery positive cable, then connect the negative cable.
8. After installing the airbag, confirm proper system operation:
-
Turn the ignition switch ON (II); the SRS indicator light should come on for about 6 seconds and then go off.
-
Make sure horn button works.
-
Take a test drive, and make sure the cruise control switches work.
9. Enter the anti-theft code for the radio, then enter the customer's radio station presets.
