3.5RL V6-3474cc 3.5L (2001)
NOTE: The front passenger's airbag has four wires, two green and two white. Twist each pair of like color wires together and connect one
alligator clip to each pair.
5. Connect a 12 volt battery to the tool:
-
If the green light on the tool comes on, the airbag igniter circuit is defective and cannot deploy the airbag. Go to Damaged Airbag or Side
Airbag Special Procedure.
-
If the red light on the tool comes on, the airbag is ready to be deployed.
6. Push the tool's deployment switch. The airbag should deploy (deployment is both highly audible and visible a loud noise and rapid inflation of the
bag, followed by slow deflation).
-
If audible/visible deployment happens, and the green light on the tool comes on, continue with this procedure.
-
If the airbag doesn't deploy, yet the green light comes ON, its igniter is defective. Go to Damaged Airbag or Side Airbag Special Procedure.
WARNING: During deployment, the airbag can become hot enough to burn you. Wait 30 minutes after deployment before touching
the assembly.
7. Dispose of the complete airbag. No part of it can be reused. Place it in a sturdy plastic bag, and seal it securely.
CAUTION:
-
Wear a face shield and gloves when handling a deployed airbag.
-
Wash your hands and rinse them well with water after handing a deployed airbag.
