3.5RL V6-3474cc 3.5L (2001)
Seat Belt Retractor: Testing and Inspection
Retractor Inspection
SRS components are located in this area. Review the SRS component locations, precautions, and procedures before performing repairs or service.
WARNING: To avoid accidental deployment and possible injury, always disconnect the seat belt tensioner connector before removing the
retractor.
1. Before installing the retractor, check that the seat bet can be pulled out freely.
Retractor Positions
Retractor Positions
Retractor Positions
2. Make sure that the seat belt does not lock when the retractor is leaned slowly up to 15° from the mounted position. The seat belt should lock when
the retractor is leaned over 40°.
