3.5RL V6-3474cc 3.5L (2001)
Control Arm: Service and Repair
Removal
Removal/Inspection
CAUTION:
-
Replace the self-locking nuts after removal.
-
Be careful not to damage the ball joint boot.
NOTE:
-
The ball joint remover will interfere with the lower arm when removing the lower arm. To prevent interference, remove the beam's pivot bolts
before installing the ball joint remover.
-
The ball joint remover will interfere with the brake hose bracket when removing the upper arm. To prevent interference, remove the brake hose
bracket before installing the ball joint remover.