3.5RL V6-3474cc 3.5L (2001)
Suspension Strut / Shock Absorber: Service and Repair
Front Shock
REMOVAL
1. Remove the brake hose clamps from the damper.
2. Remove the flange bolt.
3. Remove the flange bolt and self-locking nut, then remove the damper fork.
4. Remove the damper by removing the five flange nuts.
NOTE: Mark the right and left dampers or store them separately. Do not confuse them on installation.
DISASSEMBLE
1. Compress the damper spring with the spring compressor according to the manufacturer's instructions, then remove the self-locking nut.
CAUTION: Do not compress the spring more than necessary to remove the nut.