3.5RL V6-3474cc 3.5L (2001)
6. Remove the 6 mm brake disc retaining screws.
7. Screw two 8 x 12 mm bolts into the disc to push it away from the hub. Remove the brake disc.
NOTE: Turn each bolt two turns at a time to prevent cocking the disc excessively.
8. Remove the hub bearing unit from the knuckle.
NOTE: Wash the bearing and spindle thoroughly in high flash point solvent before reassembly.
9. Install in reverse order of removal. Tighten the new spindle nut to specified torque, then stake the spindle nut shoulder against the spindle.
