3.5RL V6-3474cc 3.5L (2001)
8. Replace the O-rings with new ones before reassembling the mainshaft and countershaft speed sensors.
9. Install washers on the mainshaft and countershaft speed sensors, then install the sensors on the transmission housing.
10. Raise the transmission with a jack.
11. Install the transmission beam on the rear transmission mount bracket/mount, then tighten the four bolts loosely.
12. Tighten the four beam bolts to the specified torque, then tighten the three inner bolts to the specified torque.
13. Install the shift cable guide bracket on the transmission beam.
14. Install the heat shields.
15. Install exhaust pipe A and the three way catalytic converter, then install the exhaust pipe A bracket.
16. Push the secondary H02S connector into the vehicle, then secure it with the harness grommet.
17. Install the secondary H02S harness cover.
18. Connect the secondary H02S connector.
