3.5RL V6-3474cc 3.5L (2001)
Valve Body: Service and Repair
Removal / Installation
Removal/Installation
WARNING: Make sure lifts, jacks and safety stands are placed properly.
1. Raise the front of the vehicle, and support it with safety stands.
2. Set the parking brake, and block both rear wheels securely.
3. Shift the transmission to the P position.
4. Remove the drain plug, and drain the Automatic Transmission Fluid (ATF). Reinstall the drain plug with a new sealing washer.
5. Remove the shift cable cover mounting bolts, then remove the shift solenoid/A/T clutch pressure control solenoid valve harness clamp and
connector from the shift cable cover.
6. Remove the shift cable cover from the transmission housing.
7. Disconnect the shift solenoid/A/T clutch pressure control solenoid valve harness connector.