3.5RL V6-3474cc 3.5L (2001)
Transmission Position Switch/Sensor: Service and Repair
Removal and Installation
REMOVAL
1. Shift the detent lever to the [P] position.
2. Pry the locktabs on the lock washer, then remove the locknut and lock washer.
3. Remove the bolts securing the A/T gear position switch, then remove the A/T gear position switch.
INSTALLATION
1. Set the A/T gear position switch to the [N] position as shown.
NOTE: The A/T gear position switch clicks in the [N] position.