CL L4-2156cc 2.2L SOHC F22B1 MFI (1997)
Trunk/Liftgate Sensor/Switch (For Alarm): Testing and Inspection
1. Open the trunk lid.
2. Disconnect the 4P connector from the trunk latch switch.
Trunk Lock Actuator/Trunk Latch Switch Test
3. Check for continuity between the terminals in each switch position according to the table.
Trunk Lock Actuator/Trunk Latch Switch Test
4. Check actuator operation by connecting power and ground according to the table.
CAUTION: To prevent damage to the actuator, apply battery voltage only momentarily.
5. If the actuator fails to work properly, replace it.