acura Workshop Repair Guides

Acura (Honda) Workshop Service and Repair Manuals

All Technical Service Bulletins for Speaker: > < Customer Interest for Speaker:|97-032
Page 2
background image

must request consideration, and get a decision, before starting work.

REPAIR PROCEDURE

1.

Remove the front door panel (2.2CL) or the front speaker cover (Integra).

2.

Adjust the bass and treble settings on the audio unit to their maximum settings, and listen to different types of music at various volume levels.

^

If there is distortion coming from the front speaker(s) only, go to step 3.

^

If there is distortion coming from all four speakers, disregard this bulletin and follow normal troubleshooting procedures.

3.

With the audio unit on and distortion coming from the front speaker(s), lightly press the speaker cone with your fingers. To prevent damage to the
speaker, do not restrict movement of the cone for more than a few seconds.

4.

If the noise subsides or is eliminated, replace the speaker(s). If the noise does not change, disregard this bulletin and follow normal
troubleshooting procedures.

5.

Reinstall the door panel(s) or the front speaker cover(s), and confirm the distortion is gone.

All Technical Service Bulletins for Speaker: > < Customer Interest for Speaker:|97-032