CL L4-2156cc 2.2L SOHC F22B1 MFI (1997)
Mirror Actuator: Service and Repair
1. Remove the power mirror from the door, and disconnect the 8P connector.
2. Remove the mirror base cover from the mirror housing.
3. Remove the mirror holder from the mirror housing. Gently pull it out by hand.
4. Remove the three screws from the actuator and the four screws from the bracket at the base of the assembly.
5. Remove the bracket from the housing.
6. Remove the two screws, cut the wire harness, and remove the actuator.
7. Record the terminal locations and wire colors,
