CL L4-2156cc 2.2L SOHC F22B1 MFI (1997)
Fail-Safe Relay: Testing and Inspection
ABS Front, Rear Fail-Safe Relay
NOTE: See turn signal/hazard relay input test.
Power Relays-Relay Test-Normally-Open Type
NORMALLY-OPEN Type:
1. Remove the power relay from its socket.
2. Check for continuity between the terminals.
-
There should be continuity between the No. and No. 3 terminals when power and ground are connected to the No. 2 and No. 4 terminals.
-
There should be no continuity between the No. 1 and No. 3 terminals when power is disconnected.
ABS Front, rear Fail-safe Relay/Blower Motor High Relay
-
ABS front fail-safe relay
-
ABS rear fail-safe relay
